3M™ Secure Click™ Organic Vapor/Acid Gas Cartridge/Filter D80923, P100, 60 EA/Case

Experience the breathability and comfort of 3M™ Secure Click™ Gas & Vapor Cartridge with Particulate Filters. They help provide convenient respiratory protection against a range of gases, vapors and particulates depending upon the model selected. 3M™ Secure Click™ Gas & Vapor Cartridge with Particulate Filter cartridges utilize dual-flow technology for easy breathing. The Secure Click™ connection style provides confidence that the cartridges are installed properly. They are NIOSH approved for use with 3M™ Secure Click™ Reusable Respirators HF-800 Series and FF-800 Series.

3M™ Secure Click™ Organic Vapor/Acid Gas Cartridge/Filter P100 D80923 has the Secure Click™ connection style. The 3M™ Secure Click™ connection style enables a quick, simple connection of the cartridges. Simply align the connections on the facepiece and cartridge/filter and push until you hear a click. The innovative Secure Click connection helps provide wearers confidence that the cartridges/filters are installed properly. Also, the Secure Click cartridges/filters are dual-flow to allow easier breathing. Two dual-flow cartridges/filters on each respirator combine to create four airflow paths in the world’s first quad-flow cartridge/filter system providing greater breathability and comfort. The 3M Secure Click Organic Vapor/Acid Gas Cartridge/Filter P100 D80923 is NIOSH-approved for use against certain organic vapors, chlorine, hydrogen chloride/sulfur dioxide, or chlorine dioxide or hydrogen sulfide and oil and non-oil based airborne particulate contaminants when used with approved 3M™ Secure Click™ facepieces. Refer to the 3M™ Respirator Selection Guide for a list of chemicals for which these cartridges/filters can be used. The D80923 is not for use in environments that are immediately dangerous to life or health (IDLH) or for sandblasting. Change 3M Secure Click Organic Vapor/Acid Gas Cartridge/Filter P100 D80923 in accordance to your well-documented change-out schedule or earlier if smell, taste or irritation from contaminants is detected. Replace the cartridges/filters if it becomes damaged or if breathing becomes difficult. If used in environments containing only oil aerosols, replace the cartridges/filters after 40 hours of use or 30 days, whichever is first. 3M offers a free online tool to help you select the appropriate respirators, cartridges, and filters for your workplace respiratory hazards and contaminants and help determine cartridge change-out schedules. 3M™ Select and Service Life Software (www.3M.com/sls) contains more than 700 different chemicals