1. Trinidad and Tobago
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Thin Flexographic Plate Mounting Tape E2105, Translucent, 18 in x 36 yd, 5 mil, 1 roll per case

3M™ Thin Flexographic Plate Mounting Tape E2105, Translucent, 18 in x 36 yd, 5 mil, 1 roll per case

  • 3M ID 70006743911

0.005 inch (0.13 mm) double coated tape has the air release feature designed to allow air to escape from between the tape and the plate

Non-linered side of the tape is designed for mounting to compressible sleeves

Securely bonds the flexographic photopolymer plate to the compressible sleeve to prevent plate edge lifting during printing

View more details

Specifications

Details

Highlights
  • 0.005 inch (0.13 mm) double coated tape has the air release feature designed to allow air to escape from between the tape and the plate
  • Non-linered side of the tape is designed for mounting to compressible sleeves
  • Securely bonds the flexographic photopolymer plate to the compressible sleeve to prevent plate edge lifting during printing
  • Clean removal from both the plate and the sleeve

3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated film tape constructed of a polyester film carrier with differential adhesives. It is specifically designed for mounting flexographic print plates to cushioned or compressible sleeves.

Mount Flexographic Plates with Confidence
3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated tape that has the air release feature designed to allow air to escape from between the tape and the plate. This crosshatched pattern creates a continuous and permanent network of micro-channels, allowing air to escape from between the tape and plate. It features excellent holding power on-press with easy and clean plate removal when demounting. In addition, it removes cleanly from the cushioned sleeve surface.

Recommended Applications

  • Mounting flexographic print plates to cushioned sleeves or compressible sleeves

Keep the Presses Running and your Customers Coming Back
For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficient of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.

Suggested applications
  • Mounting of plates for flexographic printing

Resources