1. All 3M Products
  • 3M™ Tape Primer 94, Light Yellow, 1/2 Pint Can, 12 per case
  • 3M™ Tape Primer 94, Light Yellow, 1/2 Pint Can, 12 per case

    3M ID 70016054788
    • Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
    • Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
    • Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
    • Dries to a clear finish
     More...
    Specifications
    Application Temperature-Environment (Metric)
    15°C - 27°C
    Brand
    3M™
    Clean-up
    Acetone Solvent
    Consumer Label
    No
    Full Cure Time
    2 Minute
    Industries
    General Industrial, Transportation
    National Stock Number
    8040014983919
    Net Weight (Metric)
    0.27 kg
    Overall Height (Metric)
    7.3 cm
    Physical Form
    Liquid
    Product Form
    Can, Each
    Product Type
    Primer
    Regulatory Key
    AD-02765
    Shelf Life in Months (from date of manufacture)
    18
    Storage Temperature
    60°F - 80°F
    Storage Temperature (Celsius)
    15°C - 27°C
    Volume (Metric)
    236 mL
    Details
    • Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
    • Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
    • Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
    • Dries to a clear finish
    • Cleans up with isopropyl alcohol

    3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

    Dries in Minutes for Efficient Use
    Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape.  It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape.  Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat.

    Recommended Applications

    • Promote adhesion of 3M™ VHB™ Tape
    • For use on many plastic, rubber, painted and bare metal substrates

    Application Tips
    3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.