3M™ Platinum™ Filler, 01171, 1 Gallon (US), 4 per case.

3M™ Platinum™ Filler is a professional lightweight body filler with outstanding adhesion to properly prepared steel, galvanized steel, aluminium, E coat, sheet molded compound (SMC) and fiberglass reinforced polyester (FRP). It is formulated with tack-free, stain free resin and offers long lasting results. Premium filler is compatible with most base coat/clear coat and waterborne paint systems.

3M™ Platinum™ Filler is a stain-free, tack-free, super premium lightweight filler that offers great adhesion to steel, galvanized steel, aluminium, E-Coat and SMC. 3M™ Platinum™ Filler is a premium choice for filling small dents, dings, gouges and other cosmetic imperfections. Its creamy, smooth texture mixes and spreads with ease. The formula is vacuum processed to minimize pinholes for the smoothest possible results. Specially formulated with adhesion promoters for maximum adhesion, 3M™ Platinum™ Filler produces an unyielding grip to the surface, even on galvanized steel. Platinum filler is stain-free/tack-free and is excellent for use under basecoat and clearcoat systems. This resin-rich body filler will "wet-out" sand scratches completely and provide superior mechanical adhesion, allowing technicians to apply it to cured sanded 2K primers with confidence. This eliminates the need to sand down to the bare metal, preventing the risk of corrosion and re-work. 3M™ Platinum™ Filler must be mixed with a hardener before use (hardeners sold separately), in the amount of 2% hardener by weight. Following proper surface preparation, apply a thin layer using firm pressure to ensure maximum adhesion, then apply additional layers to build up surface. Maximum filler thickness should not exceed 0.6 cm. It is ready to sand in only 20 minutes, and ready for paint or primer in 45 minutes. Follow paint manufacturer's instructions for finishing.