1. Trinidad and Tobago
  2. All 3M Products
  3. Electrical
  4. Power Cable Connectors
  5. Power Cable Terminations
  6. 3M™ Cold Shrink QT-III Termination Kit 7695-T-150, Tape/Wire/UniShield® Shielding, 5-35 kV, Insulation OD 1.05-1.80 in, 3/Kit

3M™ Cold Shrink QT-III Termination Kit 7695-T-150, Tape/Wire/UniShield® Shielding, 5-35 kV, Insulation OD 1.05-1.80 in, 3/Kit

3M ID 80610834287UPC 50054007417793
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications
  • Non-tracking, molded, silicone rubber insulation offers durability
 More...
View all details
Specifications
BIL
150 kV
Brand
3M™
Breakout Boot
No
Cable Insulation Outside Diameter Range (metric)
26.7-45.7 mm
Cable Shielding
Tape Shield, UniShield®, Wire Shield
Compatible Lug
QL2-A-350-750, QL2-A-4/0-600
Indoor/Outdoor
Indoor Non-skirted
Insulation Level
100%, 133%
Insulation Rejacketing
No
Lug/Stem Connector Included in Kit
No
Number of Conductors
1
Product Series
7690-T
Product Technology
Cold Shrink
RoHS 2011/65/EU Compliant
Undetermined
RoHS EU Comments
Contact 3M for information
Voltage
15 kV, 25 kV, 35 kV, 5 kV, 8 kV
Voltage Application
Medium Voltage
Details
  • Provides a void-free seal to tape shield, wire shield and UniShield® power cables
  • High dielectric-constant material regulates the distribution of electric field stress
  • Suitable for indoor applications
  • Non-tracking, molded, silicone rubber insulation offers durability
  • Includes 3 non-skirted, 1-piece, 3-phase, cold shrink terminations

3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions.

Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note: Lugs need to be ordered separately. Exceptions: For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only.